HS - Magazine Follower - 22LR
Tools Required:Dowel or Other Non-Marring Compression ToolPliers with Jaws Wrapped in Painters/Masking Tape
Use the dowel rod to ompress the spring and follower to the base of the magazine, so the follower button is centered in the enlarged portion of the slot. Grasp the button with the pliers and pull the button straight out of the follower. Slowly release the tension on the follower and spring. Remove them from the magazine body. Replace the follower and/or spring and insert the connected parts back into the magazine body. Compress them to the point where the hole in the follower is centered in the enlarged portion of the slot. Insert the button in the hole and press, with moderate force, until it snaps securely into the hole in the follower. Release the tension on the follower and spring.
You may need to adjust the magazine lips after making this repair.
AK Rifles and Parts - Interarms
AR Rifles and Parts - High Standard
.22 Pistols and Parts - High Standard
Pistols and Parts - AMT
1911 Pistols and Parts - High Standard
Grips & Stocks - Herrett
© Copyright 2018
Back to Top